Updated 11 November 2026
How do you label left and right in an injection-moulded part brief?
Set a reference viewing direction on the assembly, such as the front view as a user faces the product. Add a viewing arrow and mark left and right on the assembly drawing. Show the part in its fitted position and include labelled photos or samples if available. Record whether the two positions use a single part rotated into place or two different mirrored shapes. Ask readers to confirm how they interpret the labels before discussing a quote.
Left is easy to read and its meaning can change with viewpoint. An operator in front of a product sees a different side from a technician working behind it. A supplier who receives only a drawing of the loose part also has no way of knowing which surface faces the user. Establish a drawing convention early so that the team can point to the same position on the assembly, in the photograph, on the digital model and in the request.

How can you keep the reference direction clear when a view is turned?
Choose a main view that another reader can identify easily. Use a permanent feature such as a marked front panel or the face that points toward the user. Add a viewing arrow and labels for the front, top, left and right on the assembly drawing. Explain whether left follows the person facing the product or the product’s own orientation. If the buyer has an established convention, restate it near the drawing so readers do not have to infer it from a file name.
Add a rear view if a catch or hole is visible only from that side. Keep the position names from the main view. On a rear view, the assembly-left label can appear on the right of the page because the view has changed. Add a short note such as “position names follow the front view” so the reader keeps the same labels. Use text and arrows that remain readable in black and white. Colour can help distinguish the sides when each side also has a clear text identifier.
Consider parts that are handled in several orientations. If the assembly lies flat on the bench during fitting but stands upright in service, say which position defines top and bottom. On the bench photograph, add a mark that relates the photo orientation back to the main view. The reader can then see that the product turns during assembly while its left and right positions retain the same names.
What is the difference between rotating a part and mirroring its shape?
Imagine an assembly with two small covers. If one cover can be rotated and fitted on the other side without moving its catch or changing the outside face, record one part code and two installation positions. Show the direction of rotation and check that the visible face still looks as intended. If a cover fits only when flipped and that puts the texture or another face detail on the wrong side, record that observation. A matching outline alone does not establish interchangeability.
In another example, each cover has a catch on the side facing the centre of the assembly. Swapping positions makes the left cover’s catch face outward. A mirrored shape may be worth reviewing. Show each catch and its matching feature in the assembly. If the geometry is still undecided, write “review needed” and identify the constraining feature. Discuss the number of parts or mould configuration after the team has reviewed the geometry and assembly requirements together.
Check more than one feature. Holes, clips, ribs, exposed surfaces, text orientation and contact with neighbouring parts can determine whether one shape works in both positions. If a neighbouring component limits space on one side, mark the affected zone on the assembly view. Photograph both positions with the same scale or reference point so readers can compare them without relying on a similar camera angle.

How can you make drawings and samples easy to trace?
Give each position a consistent identifier. In an illustrative example, L and R indicate installation positions, while part code A serves both positions when the shape is shared. If the shapes differ, assign each a separate identity and show its corresponding position. Put a date or revision on the drawings, model and parts list. State the revision under review in the covering message.
Take a front photograph of the assembly and a detail photo of each part as fitted. Use temporary labels that do not cover catches, holes or reference surfaces. When sending loose samples, label them with the same identifiers and include installation notes. If a sample came from an older assembly or has been modified, explain its condition. A physical sample helps compare shape, while the current drawing shows the design intent under discussion. List any differences between the sample and the drawing.
What should the team review before a quote request?
Ask someone who did not prepare the drawings to identify the left and right positions using the documents alone. Give that person the same drawings and samples the supplier will receive. Ask them to point out the face toward the user and explain whether the left part can be used on the right. If the answer differs from the author’s intent, correct the arrows, view titles or mapping between part codes and positions. Repeat the read-through before issuing the package.
For the review meeting, put the main view, parts list and photos on one sheet or document page. If the mirrored difference is visible only in a small detail, enlarge both sides at the same display scale. Mark the features being compared and record the decision by feature, for example that the catch direction is fixed while a rib position remains open. After a revision, check the names on the samples, models and quantity list. A small change to a catch can leave an old attachment looking similar to the latest version even though the fitting function has changed. Separate review copies from approved copies and add a short change note so the supplier knows which part to reread.
When contacting the manufacturing team, include the main view, current part drawings, installed views and a note about shared or mirrored parts. Name the features that must stay in a particular position and those still open for discussion. If quantities differ between the left and right sides, list them by code and say whether they are trial quantities or production needs for discussion. An open question such as “Can one shape fit both sides without changing the catch position?” gives the team a starting point for reviewing the same drawings and samples.
| Package item | How to mark it |
|---|---|
| Main view | Viewing arrow and front, left, right and top identifiers. |
| Installed detail | Show the catches, holes or faces that distinguish the positions. |
| Code and revision | Map each installation position to its shape code. |
| Review finding | Record one rotated shape, mirrored shapes or review needed. |
See Cave Mekar Group injection moulding and the group product directory. Share your sample notes with the Cave Mekar Group team.
Frequently asked questions
Does left follow the viewer or the product?
Either convention can work if explained. Define the reference in the main view with a viewing arrow and a note near the labels.
Does the left position get a new name in the rear view?
Keep the position name from the main view. The assembly-left label can appear on the right side of the page in a rear view.
When can one part code serve both sides?
After the team confirms one shape fits both positions with the required orientation, visible face and fitting features.
What should I send if I do not have a sample?
Send the main view, current part drawings, installed details and a list of features to review. State that a sample is not yet available.
Do two mirrored shapes always require two moulds?
Discuss tooling with the manufacturing team after geometry, assembly and production needs are reviewed. Left and right labels alone do not determine mould configuration.

